India Boiler dot Com
Loading, please wait...
India Boiler dot Com Logo
India Boiler dot Com
Knowledge · Training · Consultancy
Boiler

Discuss practical improvements for performance and reliability.

Join discussions on common plant O&M issues that can be addressed through improved practices, innovative approaches and shared field experience.

20
Topics Found
19
Posts Shown

Discussion Topics

Search is applied across all approved topics, not only the visible page.

Clear
Showing result in category Boiler
#1 Boiler mode1

A selected discussion topic on a common plant O&M issue This is becoming quite a big challenge for a number of CFBC boilers, particularly with the new stringent emission limits imposed by the PCB’s. Ineffective in-bed su...

Topic initiated by: Administrator Posts: 2
#2 Boiler mode1

ESP performance is becoming a continuous challenge for our industries using solid fuel in their boilers.

Topic initiated by: Administrator Posts: 2
#3 Boiler mode1

This is one area where most organizations take lots of initiatives. Introducing VFD for flow control, replacement of under loaded auxiliary equipment, trimming of impellers, etc. are quite common. However, sometimes a pa...

Topic initiated by: Administrator Posts: 2
#4 Boiler mode1

Coal fired power plants fire huge quantity of Coal for generation of power. Hence Generators has to spend lot of money for this. But generators, incur huge loss  due to poor operating parameters / conditions.

Topic initiated by: Mr. D Nandi Posts: 2
#5 Boiler mode1

There have been quite a few cases of emergency lube oil pump failing to cut in and leading to Steam Turbine bearing and other components damage.

Topic initiated by: Mr. Hemant C G Posts: 1
#6 Boiler mode1

Failures of last stage (long!) blades of LP Steam Turbine are well known in the power plant community. Causes of failure include pitting, erosion, corrosion, fatigue, SCC, fretting and combination of these.

Topic initiated by: Mr. Hemant C G Posts: 1
#7 Boiler mode1

The metallurgies used in these tubes are highly susceptible to overheating failures and thus highly sensitive to temperature excursions. Frequently changing load, increased number of start-ups, fast ramp-up coupled with...

Topic initiated by: Administrator Posts: 2
#8 Boiler mode1

Slagging and fouling can make the life of the PF boiler O&M personnel really difficult at times. This often leads to saturation of ID Fan capacity and creates a highly unsafe condition in the furnace. We invite all commu...

Topic initiated by: Administrator Posts: 2
#9 Boiler mode1

At many plants the CBD is operated in the fashion any common man takes a paracetamol pill whenever his body temperature exceeds 98.6 oF. If boiler water chemical parameter exceeds the limit, it tells us something is wron...

Topic initiated by: Administrator Posts: 2
#10 Boiler mode1

The loss of un-burnt carbon with Fly ash and Bottom ash of any solid fuelled boilers is undesirable as it leads to huge wastage of fuel and thus revenue loss. Un-burnt in the fly ash in particular should be critically co...

Topic initiated by: Administrator Posts: 3